Bosch APC-AMC2-4WCF Manuale di Installazione Scaricare il pdf (Pagina 28)

28 en | Installing AMC2 4W | Installation manual

F.01U.024.965 | V 0.1 | 2006.03 Bosch Sicherheitssysteme GmbH

5.3 Opening the AMC2 4W Case

The AMC2 4W case consists of a top cover mounted with a two-

point snap-in closure on a ground chassis. To open the

AMC2 4W push down the two snap-ins with a srew driver. After

that the cover can be moved to bottom.

Fig. 5.3 Opening the AMC2 4W case

5.4 Cabling

NOTE!

To open the AMC2 4W, first, remove all pluggable screw con-

nectors at least the host connection.

CAUTION!

The cables used in the AMC2 4W access control system are not

prone to electrical interference. However, you should avoid

routing cables close to heavy load switching cables and equip-

ment. If this is unavoidable, cross the cable at right angles every

1 to 2 m (3 to 6 ft) to reduce interference.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 61 62

Nessun commento

Bosch APC-AMC2-4WCF Manuale di Installazione Pagina 28