Bosch SE2005 Guida di Configurazione Scaricare il pdf (Pagina 22)

Security Escort | Installation and Setup Guide | 2.0

E

q

ui

p

ment Estimation

EN | 22

Bosch Security Systems | 1/09 | 33831E

2. Using a Maintenance Transmitter

with only one person

a. The Security Escort software

retains the last 50 maintenance

alarm locations. Make sure you

are the only one using a

Maintenance Transmitter on site,

buddy check is off, and that you

limit yourself to a maximum of

50 maintenance alarms per

sequence.

b. Synchronize the time on your

watch to the computer. Carry a

detailed map or floor plan of

the area to be tested that you

can write on.

c. Take the Maintenance Transmitter

to the area to be tested. Press

the alarm on the transmitter and

accurately mark the spot on the

map where you transmitted with a

“1” (for the first

transmission). Also record the

time of the first transmission

only.

d. Continue to the next location,

transmit and mark that spot on

the map with a “2.” Repeat the

process throughout the area to

be tested, being sure not to

exceed 50 alarm transmissions

and making sure that at least

10-sec. elapse between

transmissions.

e. When finished, return to the

computer and select File

→

Maintenance Alarm Database.

Scroll through the alarm list to

find the alarm that matches the

time of your first transmission.

This is the maintenance alarm

that you marked as “1” on your

map.

f. Confirm that the actual location

from the map matches the

reported location.

g. If the actual location differs

from the reported location, draw

an arrow on the map from the

actual location to the reported

location. Press the up arrow

once to go to the next alarm.

Compare the locations, drawing

an arrow to the reported

location if they differ. Repeat

this procedure for all points on

your map, making sure that the

points on the map stop when you

run out of entries in the

scrolling list on the computer

screen. Otherwise, the points on

the map and the screen are out

of sync and the errors on your

map are incorrect and

misleading.

h. For areas where there were alarm

location problems, you may want

to repeat the above process

facing in different directions

from the same spot. This

generates additional alarms from

different spots in the problem

areas to fully understand the

extent of the problem.

i. You should also generate alarms

in areas adjacent to the area

with the problem to see if they

are also affected.

3. Using a Maintenance Transmitter

with two people

a. The two people must have radio

contact between them. One person

operates the computer running

the Security Escort software and

the other takes the Maintenance

Transmitter to the area to be

tested.

b. At the computer select File

→

Maintenance Alarm Database. Make

sure the top item in the

scrolling list is selected.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 53 54

Commenti su questo manuale

Nessun commento