Bosch APC-AMC2-4WCF Manuale Utente Scaricare il pdf

Engineered Solutions | AMC2 - Access Modular Controller

AMC2 - Access Modular Controller

www.boschsecurity.com

u Intelligent access manager for one to eight

entrances

u Four interfaces include the reader power supply

u Standard 2 GB compact flash

u LCD display for displaying information

u Self-controlling send and receive switching

The AMC2 (Access Modular Controller) is used as an

access controller in the access control systems ACE

(ACCESS ENGINE) from version 2.0 onward, Access

Personal Edition, and Access Professional Edition. The

device controls a group of one to eight access points.

These access points, also known as entrances, mainly

consist of doors, gates, barriers, turn stiles, revolving

doors, mantraps, ID card readers, door opening

elements and sensors. The AMC2 can control up to

eight ID card readers (depending on the reader type)

and is designed for fully processing the access logic at

the assigned entrances.

Status checks can be carried out using the eight

analog inputs. The eight relay outputs are used to

activate the door opening elements and/or generate

the security activation and signaling. The AMC2 stores

all necessary information in a battery-buffered memory

and a compact flash storage element so that, even

when the unit is offline, it is able to carry out

independent authorization checks on access points,

take access decisions, control closing/opening

elements and register movement events.

System overview

1 = Host computer

2 = AMC2

3 = Card reader

4 = Communication and power supply

As shown in the diagram, the AMC2 is integrated

between the host system (e.g. Access Engine) and the

peripheral devices.

They are connected to the host system via RS485,

RS232 (e.g. modem operation) or Ethernet, depending

on the size of the system. The relevant host interface

is selected during installation. All three interfaces are

1 2 3 4 5 6

Sommario

Pagina 1 -

Engineered Solutions | AMC2 - Access Modular ControllerAMC2 - Access Modular Controller www.boschsecurity.com u Intelligent access manage

Pagina 2

available on the device by default. With RS485operation, a maximum of eight AMC2’s can beconnected to one party line.There are up to four slots on the

Pagina 3

Alternatively, the RS485 host interface (2 or 4-wire)can be activated in the AMC2 via a jumper. There aretwo sets of connection points; one for the in

Pagina 4

• The outputs can operate using the internal voltage ofpower supply (wet mode).• Only ohm resistive loads can be connected to therelay.• Inductive loa

Pagina 5

AMC2-16IONStandalone Controller with inputs and outputs, only.Order number API-AMC2-16IONAMC2-16IONController with inputs and outputs, only.Order numb

Pagina 6

6 | AMC2 - Access Modular ControllerRepresented by:Americas: Europe, Middle East, Africa: Asia-Pacific: China: America Latina:Bosch Security Systems,