Bosch APC-AMC2-4WCF Manuale di Installazione Scaricare il pdf (Pagina 11)

AMC2 4W Safety Instructions | en 11

Bosch Security Systems Installation manual F.01U.024.965 | V.4 | 2006.09

2.3 Safety Precautions

Read instructions!

Before working with the AMC2 4W, read these instructions

carefully. Make sure you have understood all information

described in this document.

Warning! Risk of electric shock!

External power supplies must be installed and put into service

by qualified personnel. Compliance with the relevant regula-

tions must be ensured.

Warning! Risk of damaging equipment!

• Always switch off power of the AMC2 4W before mod-

ifying the installation.

• Do not connect or disconnect plug connectors, data

cables or screw connectors while power is on!

Health and Safety

Installation of the AMC2 4W must comply with any local fire,

health and safety regulations. A secured door that may be part

of an escape route from an area must be installed with:

• A fail-safe lock. So that the door will be released if

power fails. Ideally, a magnetic lock should be used as

these are less likely to jam or seize.

• A normally-closed break-glass or manual pull in the

lock supply wiring, so that in an emergency the fail-

safe lock can be immediately powered down.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 59 60

Nessun commento

Bosch APC-AMC2-4WCF Manuale di Installazione Pagina 11