Bosch X40 Manuale Utente Scaricare il pdf (Pagina 23)

VideoJet X40 SN Installation | en 23

Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06

Backup Power Supply

If the VideoJet X40 SN does not have a permanent power supply, it may be necessary to

supply the internal clock separately. To do this, you can connect the VideoJet X40 SN directly

to a battery via the BP and GND contacts. The correct time is crucial for evaluating local

recordings.

1. Connect the + (plus) line on the battery to the BP terminal on the orange terminal block.

2. Connect the – (minus) line on the battery to the GND terminal on the orange terminal

block.

3. Now check that the connections are secure.

CAUTION!

Connect only batteries with the following specification: 10 to 30 V DC, 50 Ah max.,

12/24 V continuous flow.

NOTICE!

If you do not connect a battery to the unit, you should specify a time server to ensure correct

system time.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 129 130

Nessun commento

Bosch X40 Manuale Utente Pagina 23