the sensor is active. This LED indicator will flash green
if the battery is ok or red if the battery is low. Pushing
the central red button will send a help call to the so-
cial alarm system, followed by a short beeping sound.
Pre-alarm and help call button deactivation
You can delete the pre-alarm or deactivate the central
red button as help call button. In this case, during the
automatic tilt alarm, the sensor remains silent.
Deactivation of the ManDown Sensor
You can turn off the sensor, even when the help call
button is deactivated. In this case, a help call will be
sent only after pressing the help call button for less
than five seconds and releasing it.
Certifications and Approvals
CE
R&TTE 1999/5/EC
LVD 2006/95/EC
EMC 89/336/EEC
EN 50130-4 A2
EN 300220-2
EN 301489-3 V1.4.1
EN 60950-1
Region Certification
Europe CE Declaration of Conformity for the Man-
Down Sensor
Installation/Configuration Notes
Programming
To program a ManDown Sensor with a Carephone (e.g.
Carephones 10, 12, 3050, 3100, 50, 52, 52+), follow
the procedure described for the system you are using.
As the ManDown Sensor can be considered as a stand-
ard transmitter, the system will recognize it during the
programming step. Please refer to the manual of the
corresponding social alarm unit.
Parts Included
Quant. Component
1 ManDown Sensor
Technical Specifications
Dimensions (H x W x D) 75mm x 40mm x 23mm
Weight 43 g
Frequency 869.2125 MHz
Tilt sensor Mercury-free type with activating
at a 60° angle with vertical
Pre-alarm 10 seconds of detection, fol-
lowed by 30 seconds of signal be-
fore automatic activation.
Type of plastic ABS Cycolac GPM5500S white
25020 with fire classification UL
94 HB
Power supply 3V lithium battery CR1/2AA
Consumption Stand-by mode: < 13 µA
When deactivated : < 5 µA
Battery lifetime from six months to two years, de-
pending on operation and the
number of detections performed
Battery alarm at approx. 20 % remaining
Automatic battery test daily check and at every alarm
Permissible temperature 5 °C to 35 °C
Stability < ± 2.5 kHz
Modulation FSK
Antenna Integrated loop
Radiated power 2 mW
Transmission time Bosch protocol: 1 x 700 ms
TeleAlarm protocol: 3 x 700 ms
Pauses between transmissions TeleAlarm protocol: 800 ms
Short term storage (less than two
weeks)
Deactivate the sensor.
Long term storage (more than two
weeks)
Remove the battery and store the
ManDown Sensor protected from
direct sunlight, moisture and
dust.
Ordering Information
ManDown Sensor
With TeleAlarm protocol
Order number CRS-RM-435FM
ManDown Sensor
With Bosch protocol
Order number CRS-MADO-869B
ManDown Sensor
With TeleAlarm protocol
Order number CRS-CP-MD-TA
2 | Social Alarm ManDown Sensor
(4 pagine)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale