Bosch DIP-6082-8HD Guida di Installazione Scaricare il pdf (Pagina 17)

2. Open the Remote Desktop Connection on your client system. In the Computer box, enter

the IP Address of the disk array you want to connect to.

Default IP Address: 10.10.10.10 (port 1)

3. Click Connect, press Ctrl+Alt+Del (if shown), then type the default password WSS4Bosch

once the disk array login window is displayed.

To configure the IP address:

1. After starting the system, on first login the desktop default settings are applied. This will

take a few seconds and the system will reboot. After system reboot, log on again and the

Bosch VRM Appliance initial configuration window will be shown. Use this program to

configure the disk array’s IP Address.

2. The top level view of Bosch VRM Appliance initial configuration displays an overview of

the system’s configuration and settings. Select the link Configure networking to get

access to the network configuration.

DIVAR IP 6000 2U

System Setup – first Steps | en 17

Bosch Sicherheitssysteme GmbH Quick Installation Guide 2013.05 | V3 | DOC

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 25 26

Nessun commento

Bosch DIP-6082-8HD Guida di Installazione Pagina 17