Bosch PXY801DW4E Manuale delle Istruzioni Scaricare il pdf (Pagina 48)

en Trouble shooting

Notes

■ If “ appears in the display, the sensor for the

relevant hotplate must be pressed and held in order

to read the fault code.

■ If the fault code is not listed in the table, disconnect

the hob from the power supply, wait 30 seconds and

connect it again. If the display appears again,

contact technical after-sales and tell them the

precise fault code.

The temperature sensor indica-

tor is not lighting up

The temperature sensor is not responding and

the indicator is not lighting up.

Replace the 3 V CR2032 battery. See the section entitled

~ "Changing the battery"

If this does not solve the problem, press and hold the symbol on

the temperature sensor for 8-10 seconds and then reconnect the

temperature sensor to the hob. See the section entitled

~ "Connecting the wireless temperature sensor to the control

panel"

If the problem persists, contact the technical after-sales service.

The indicator on the sensor

flashes twice

The battery in the temperature sensor has

almost run out. You may be interrupted the next

time you cook by the battery running out.

Replace the 3 V CR2032 battery. See the section entitled

~ "Changing the battery"

The indicator on the sensor

flashes three times

The wireless connection to the temperature sen-

sor has been broken.

Press and hold the symbol on the temperature sensor for 8-10

seconds and then reconnect the temperature sensor to the hob.

See the section entitled ~ "Connecting the wireless

temperature sensor to the control panel"

“Š‹‹‹

“Š‹‚‹

The operating voltage is incorrect/outside of the

normal operating range.

Contact your electricity supplier.

—…‹‹

The hob is not connected properly Disconnect the hob from the power supply. Check that it has

been connected as shown in the circuit diagram.

š“

Demo mode is activated Disconnect the hob from the power supply. Wait for 30 seconds

before reconnecting it. Touch any touch control in the next

3 minutes. Demo mode has now been deactivated.

Indicator/symbol Possible cause Remedial action

Do not place hot cookware on the control panel.

1 2 ... 43 44 45 46 47 48 49 50 51 52

Commenti su questo manuale

Nessun commento

Bosch PXY801DW4E Manuale delle Istruzioni Pagina 48

Commenti su questo manuale

Prodotti e manuali riguardandi Piani cottura Bosch PXY801DW4E