Bosch DiBos Micro Guida di Installazione Scaricare il pdf (Pagina 96)

96 en | Default Configuration DiBos/DiBos Micro

F.01U.033.308 | V7 | 2009.09 Installation Guide Bosch Sicherheitssysteme GmbH

Adding/processing remote stations

Remote stations menu > New button

In this dialog box, you determine remote station settings that enable connections to this

remote station to be established. Connection is possible via modem/ISDN and network.

1 Designation Enter a name for the remote station.

Number/Address For a modem/ISDN:

Enter the complete telephone number of the remote station.

If your own workstation is connected to a PBX, you must

enter a prefix (in most cases 0) before entering the remote

station number.

For a network:

Enter the remote station IP address or the computer name.

Modem/ISDN Connect the remote station via a modem or ISDN.

Low bandwidth (live

mode)

In live mode, only every 30th image is displayed.

2 Windows user account Make the Windows user account settings for modem/ISDN

transmission.

User: If required, enter the user here. In the default settings, a user

has already been created.

Change password The password can be changed as necessary. The password

must match that of the remote station.

Reset user account Resets the user account.

OK The entries are saved.

NOTICE!

To configure a modem connection, an RAS-capable modem must be connected and an RAS

service installed. If no RAS-capable modem is connected or no RAS service is installed, a notes

icon and a button with additional information appears.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 157 158

Nessun commento

Bosch DiBos Micro Guida di Installazione Pagina 96